Flowise water flow regulators
What is a water flow regulator?
Flowise flow regulators function is control mold cooling water of injection, extrusion, die casting machines or other applications where is necessary manage fluid control. 5 Serie, 2 Serie, 1 Serie, 1M Serie, 1R Serie and Mini are Flowise regulators of water flow made in 50 or 60 mm of plexiglass© machined blocks, tested at 20 bar for guarantee no water loss. Our water flow regulators Series are equipped of double manifolds (water to mold and back from mold), one manifold water to mold or back from mold or with only regulation and visualization of flow. Flowise water flow control devices are different for hydraulic connections that can be under the frame (5 Serie) or back (2 Serie) equipped of adjustable water flow control brass valves. Flowise is the only water flow regulators manufacturer that produce with a modular system: blocks from 1 to 6 zones can be assembly together until 24 zones with central manifold and back hydraulic connections for the best flow distribution. The water flow rate regulation is visible on screen printing scale using 4 interchangeable different floats made in pvc, red anodized aluminum and brass, each one has his flow range: 0-3,5 Lpm(pvc) 0-8,3 Lpm(red anodized aluminum) 1-15 Lpm(brass type 1) 4-25 Lpm(brass type 2). Flowise flow regulators lpm and gpm measure.
Cooling water flow regulators
- 50-60 mm thick plexiglass© machined blocks (depend to model choose).
- 0-3,5(pvc) 0-8,3(red anodized alumium) 1-15(brass type 1) 4-25(brass type 2) flow rate Lpm regulator.
- 0,04-0.9(pvc) 0,09-2.2(red anodyzed aluminium) 0,4-4.1(brass type 1) 1-6.6(brass type 2) flow rate Gpm regulator.
- Connections to and from mold under or back frame (depend to model choose).
- Available with double manifolds, manifold water to mold, manifold water from mold, without manifold.
- 20 bar water @ 20° C test certificated.
- Modular system until 24 zones water flow regulator.
- Can replace Onda water flow regulator, water flow regulator Wittmann, Shini water flow regulator, Smartflow flow meter, flow regulator Sella: fixing dimension are same of other industrial water flow regulators.
- Measurement cones can be replace by rusty, limestone or algae dirty using our cleaner: it’s not necessary to buy expensive spare parts.
- Brass and anodized anti corodal aluminum for components.
- Max working temperature 80° C - 176° F
- 100% design, developed and made in Italy.
5 Serie
FLOW REGULATOR WATER DOUBLE MANIFOLDS, MOLD CONNECTIONS UNDER THE FRAME.
5 Serie flow regulator built from a 60 mm thick machined plexiglass© block, available from 1 to 6 zones with double manifolds, brass water flow regulation valves. Temperature and flow regulation meter using 4 interchangeable different floats made in pvc, red anodized aluminum and brass. Mold connections under frame, thanks to modular system are available flow regulator until 24 zones: it’s recommended, from 12 zones flow regulator for water best distribution, to request central manifold with inlet and outlet back aluminium connections Gas 2’’.
5 Serie flow regulator models:
- 035: 0-3,5 Lpm flow regulator meter (grey pvc floats)
- 008: 0-8,3 Lpm flow regulator meter (red anodized aluminum floats)
- 115: 1-15 Lpm flow regulator meter (brass type 1 floats)
- 425: 4-25 Lpm flow regulator meter (brass type 2 floats)
- 009: 0,04-0.9 Gpm water flow rate (grey pvc float)
- 022: 0,09-2.2 Gpm water flow rate (red anodyzed float)
- 041: 0,4-4.1 Gpm water flow rate (brass type 1 float)
- 166: 1-6.6 Gpm water flow rate (brass type 2 float)
Technical specifications:
- Main hydraulic brass connections Gas ¾’’ or 1’’ F right or left side. Available also Npt ¾’’ or 1’’ F connections.
- Mould connections under the frame Gas 3/8’’ F or Gas ½’’ F with hose fittings Ø 10-13-15 mm.
- double °C and °F scale for thermometers.
- 60 mm thick plexiglass© machined blocks.
- Max pressure 20 Bar @ 20° C water fluid.
- 80° C – 176° F max working temperature.
- Tested at 20° Bar (20° C water) after assembly for guarantee no water loss.
Options:
- Flowise flow regulator for cooling, rusty, limestone or algae dirty cleaner
- Central manifold with main back connections for best flow distribution.
- Gas ¾’’ or Gas 1’’ 90° brass or galvanized steel elblow coupler.
- 5 Serie, water flow regulator, in injection molding is available with brass or stainless steel closing solenoids valves for centralized shutdown of mold circuits to avoid condensation.
- Backets for frontal fixe on machinery.
2 Serie
WATER FLOW REGULATOR DOUBLE MANIFOLS, MOLD CONNECTIONS BACK THE FRAME
2 Serie flow regulator built from a 50 mm thick machined plexiglass© block, available from 1 to 6 zones with double manifolds, mold connections under frame, brass regulation valves and C° – F° thermometers. Flow regulation and meter using 4 interchangeable different floats made in pvc, red anodized aluminum and brass.
2 Serie flow regulator models:
- 035: 0-3,5 Lpm flow regulator meter (grey pvc floats)
- 008: 0-8,3 Lpm flow regulator meter (red anodized aluminum floats)
- 115: 1-15 Lpm flow regulator meter (brass type 1 floats)
- 425: 4-25 Lpm flow regulator meter (brass type 2 floats)
- 009: 0,04-0.9 Gpm water flow rate (grey pvc float)
- 022: 0,09-2.2 Gpm water flow rate (red anodyzed float)
- 041: 0,4-4.1 Gpm water flow rate (brass type 1 float)
- 166: 1-6.6 Gpm water flow rate (brass type 2 float)
Technical specifications:
- Main hydraulic brass connections Gas ¾’’ or 1’’ F right or left side. Available also Npt ¾’’ or 1’’ F connections.
- Mold connections back the frame Gas 3/8’’ F or Gas ½’’ F with hose fittings Ø 10-13-15 mm.
- double °C and °F scale for thermometers.
- 50 mm thick plexiglass© machined blocks.
- Max pressure 20 Bar @ 20° C water fluid.
- 80° C – 176° F max working temperature.
- Tested at 20° Bar (20° C water) after assembly for guarantee no water loss.
Accessory:
- Flowise flow regulator for cooling, rusty, limestone or algae dirty cleaner
- Central manifold with main back connections for best flow distribution.
- Gas ¾’’ or Gas 1’’ 90° brass or galvanized steel elblow coupler.
- 2 Serie, regulator of water flow, in injection molding is available with brass or stainless steel closing solenoids valves for centralized shutdown of mold circuits to avoid condensation.
- Backets for frontal fixe on machinery.
1 SERIE
COOLING WATER FLOW REGULATOR MULTI ZONES WITHOUT MANIFOLS
1 Serie is a multi zones water flow regulator made in a 50 mm thick machined plexiglass© block in two modules, 4 and 6 zones, with regulation, temperature and flow measurement of cooling water. 1 Serie has two inlet (IN) connections: bottom or back and one outlet (OUT) on back the frame. Floats can be of different material as a function of flow rate measure. Flowise modular system allow to assembly 1 Serie flow regulator until 10 zones.
1 Serie flow regulator models:
- 035: 0-3,5 Lpm flow regulator meter (grey pvc floats)
- 008: 0-8,3 Lpm flow regulator meter (red anodized aluminum floats)
- 115: 1-15 Lpm flow regulator meter (brass type 1 floats)
- 425: 4-25 Lpm flow regulator meter (brass type 2 floats)
- 009: 0,04-0.9 Gpm water flow rate (grey pvc float)
- 022: 0,09-2.2 Gpm water flow rate (red anodyzed float)
- 041: 0,4-4.1 Gpm water flow rate (brass type 1 float)
- 166: 1-6.6 Gpm water flow rate (brass type 2 float)
Technical specifications:
- INLET connections (IN) bottom or back the frame Gas 3/8’’ F or Gas ½’’ F with hose fittings Ø 10-13-15 mm.
- OUTLET (OUT) connections back the frame Gas 3/8’’ F or Gas ½’’ F with hose fittings Ø 10-13-15 mm.
- double °C and °F scale for thermometers.
- 50 mm thick plexiglass© machined blocks.
- Max pressure 20 Bar @ 20° C water fluid.
- 80° C – 176° F max working temperature.
- Tested at 20° Bar (20° C water) after assembly for guarantee no water loss.
Accessory:
- Flowise flow regulator for cooling, rusty, limestone or algae dirty cleaner
- 1 Serie, regulator of water flow, in injection molding is available with brass or stainless steel closing solenoids valves for centralized shutdown of mold circuits to avoid condensation.
- Backets for frontal fixe on machinery.
1 M SERIE
COOLING WATER FLOW REGULATOR INLET MANIFOLD
1M Serie regulator of water flow made in a 50 mm thick machined plexiglass© block in two modules, 4 and 6 zones, with regulation, temperature and flow measurement of cooling water to mold with inlet manifold. Floats can be of different material as a function of flow rate measure. Flowise modular system allow to assembly 1M Serie flow regulator until 10 zones.
1M Serie flow regulator models:
- 035: 0-3,5 Lpm flow regulator meter (grey pvc floats)
- 008: 0-8,3 Lpm flow regulator meter (red anodized aluminum floats)
- 115: 1-15 Lpm flow regulator meter (brass type 1 floats)
- 425: 4-25 Lpm flow regulator meter (brass type 2 floats)
- 009: 0,04-0.9 Gpm water flow rate (grey pvc float)
- 022: 0,09-2.2 Gpm water flow rate (red anodyzed float)
- 041: 0,4-4.1 Gpm water flow rate (brass type 1 float)
- 166: 1-6.6 Gpm water flow rate (brass type 2 float)
Technical specifications:
- Main hydraulic brass connection Gas ¾’’ or 1’’ F right or left side. Available also Npt ¾’’ or 1’’ F connections.
- Mold connections back the frame Gas 3/8’’ F or Gas ½’’ F with hose fittings Ø 10-13-15 mm.
- double °C and °F scale for thermometers.
- 50 mm thick plexiglass© machined blocks.
- Max pressure 20 Bar @ 20° C water fluid.
- 80° C – 176° F max working temperature.
- Tested at 20° Bar (20° C water) after assembly for guarantee no water loss.
Accessory:
- Flowise flow regulator for cooling, rusty, limestone or algae dirty cleaner
- Gas ¾’’ or Gas 1’’ 90° brass or galvanized steel elblow coupler.
- 1M Serie, regulator of water flow, in injection molding is available with brass or stainless steel closing solenoids valves for centralized shutdown of mold circuits to avoid condensation.
- Backets for frontal fixe on machinery.
1R Serie
FLOW REGULATOR FOR COOLING WATER OUTLET MANIFOLD
1R Serie, flow rate regulator and temperature meter of cooling water back to mold with outlet manifold. 1R Flowise regulator of flow is made in a 50 mm thick machined plexiglass© block in two modules, 4 and 6 zones, and is possible to assembly 1R Serie until 10 zones. Floats can be of different material in function of flow rate measure.
1R Serie flow regulator models:
- 035: 0-3,5 Lpm flow regulator meter (grey pvc floats)
- 008: 0-8,3 Lpm flow regulator meter (red anodized aluminum floats)
- 115: 1-15 Lpm flow regulator meter (brass type 1 floats)
- 425: 4-25 Lpm flow regulator meter (brass type 2 floats)
- 009: 0,04-0.9 Gpm water flow rate (grey pvc float)
- 022: 0,09-2.2 Gpm water flow rate (red anodyzed float)
- 041: 0,4-4.1 Gpm water flow rate (brass type 1 float)
- 166: 1-6.6 Gpm water flow rate (brass type 2 float)
Technical specifications:
- Main hydraulic brass connection Gas ¾’’ or 1’’ F right or left side. Available also Npt ¾’’ or 1’’ F connections.
- Mold connections back the frame Gas 3/8’’ F or Gas ½’’ F with hose fittings Ø 10-13-15 mm.
- double °C and °F scale for thermometers.
- 50 mm thick plexiglass© machined blocks.
- Max pressure 20 Bar @ 20° C water fluid.
- 80° C – 176° F max working temperature.
- Tested at 20° Bar (20° C water) after assembly for guarantee no water loss.
Accessory:
- Flowise flow regulator for cooling, rusty, limestone or algae dirty cleaner
- Gas ¾’’ or Gas 1’’ 90° brass or galvanized steel elblow coupler.
- 1R Serie, regulator of water flow, in injection molding is available with brass or stainless steel closing solenoids valves for centralized shutdown of mold circuits to avoid condensation.
- Backets for frontal fixe on machinery.
Mini
0-8 LPM FLOW RATE REGULATOR WITH DOUBLE MANIFOLDS
Mini is a modular flow regulator made in 60 mm thick machined plexiglass© block of 2, 3, 4 zones and thanks to our modularity system will be feasible patterns from 5 to 8 zones. Mini is Flowise model for small injection molding machines or for water applications with flow rate 0-8 Lpm or 2,2 Gpm max.
Technical specifications:
- Main hydraulic brass connection Gas ¾’’ right or left side. Available also Npt ¾’’ connections.
- Mold connections under the frame Gas 3/8’’ F with hose fittings Ø 10-13-15 mm.
- double °C and °F scale for thermometers.
- 60 mm thick plexiglass© machined blocks.
- Max pressure 20 Bar @ 20° C water fluid.
- 80° C – 176° F max working temperature.
- Tested at 20° Bar (20° C water) after assembly for guarantee no water loss.
Accessory:
- Flowise flow regulator for cooling, rusty, limestone or algae dirty cleaner
- Gas ¾’’ 90° brass or galvanized steel elblow coupler.
- Mini, regulator of water flow, in injection molding is available with brass or stainless steel closing solenoids valves for centralized shutdown of mold circuits to avoid condensation.
- Backets for frontal fixe on machinery.
Oem Design
UNIQUE DESIGN
Flowise flow regulators are a project born in the second millennium not only with the intention to create something useful but to realise something more.
Like other designer’s signature his style could blend with the specific design of the machine and become an O.E.M. themselves.
Tested
Our commitment for quality
Flowise flow regulators, after assembly, are tested at 20 Bar pressure, fluid water at 20° C. Customer will receive the article with a sticker that reports the overcoming of the pressure test, date and signature of our tester.
Features
What makes Flowise flow regulators different ?
50 or 60 mm thickness plexiglass® (pmma) machinery blocks without assembled parts.
Fixing side holes to the machine with same dimensions of other f.r. manufacturers.
Height: 5 Serie: 300 mm | 1 Serie & Mini: 260 mm
Thickness: 5 Serie & Mini: 60 mm | 1 Serie: 50 mm
Width: From 70 to 270 mm
Modules from 1 to 6 zones assemblable togheter up to 24 zones with central water distribution manifold.
Four interchangeable floats for many flow rates of cooling water for mold, blow, extrusion of plastic materials or die-casting.
SS-44157013-7a00f